Change the language of the site          
Industrial Measurement & Control, CEM systems, measuring vans, shelter, analysers and gasconditiongcomponents
Laboratory equipment, color-, ph-, ion selective-, polari-, refracometers
Farmer measurements, NH3, emmision
Reduced Oxygen Reduced Breathing Device, Gas mixing systems
Refractometers, Color measurements and Calcium
Service, Preventive and corrective maintenance, 24/7 contracts
Marine emission monitoring
Home > Gas Analysers > gas analysers => brand: cosaxentaur

Gas Analysers(6) Filter: gas analysers => brand: cosaxentaur

Gas Analysers

 

Xentaur Dew Point Extractive Sampling System

Xentaur Dew Point Extractive Sampling System

The ESS dew point measurement system has a modular design and can be configured to meet almost any dew point analysis requirement using different dew point meters manufactured by COSA Xentaur. 

Dew point meter HDT

Dew point meter HDT

Xentaur’s Dew Point Meter, Model HDT, is a rugged and unique loop powered dew point meter capable of both gas and liquid hydrocarbon phase measurements. 

COSA 9610 BTU Calorimeter

COSA 9610 BTU Calorimeter

The COSA 9610™ is one of the latest instruments from COSA Xentaur for measuring Wobbe Index, BTU/Heating Value and CARI (Combustion Air Requirement Index). 

COSA 9750 BTU Calorimeter

COSA 9750 BTU Calorimeter

The Cosa 9750 is a fast response Zero Emission calorimeter for the on-line monitoring of Wobbe Index (WI), Combustion Air Requirement Index (CARI) and Heating Value (HV). The COSA 9750 is based on the Residual Oxygen Method (ROM), thus avoiding the use of a flame. 

COSA CV PRO Portable Calorific Value Measurement

COSA CV PRO Portable Calorific Value Measurement

COSA Xentaur introduces one of the first commercially available portable Optical Gas Calorimeters. After extensive development work, this instrument proudes the fastest spot check response in the industry; T90=15 seconds for Natural Gas and LPG. 

Wobbe Index Calorimeter / BTU

Wobbe Index Calorimeter / BTU

The Wobbe Index is actually the correct representation of the heating value of natural gas arriving, from the gas line, at the orifice where a burner is located.
It is not simply the BTU per cubic foot but rather the BTU per cubic foot divided by the square root of the specific gravity. 

Ankersmid Process
Samuel Morsestraat 4
7442 DH Nijverdal
Netherlands


(31)-0548-59 59 69
(31)-0548-62 19 72
info@ankersmid.com

© 2026 - Ankersmid Group